RING JOINT GASKETS Styles Material cross reference chart Style R Style RX Style BX Lens Ring Gaskets

SPIRAL WOUND GASKETS Gasket Styles Color Coding & Materials Seating Stress & Materials ASME/ANSI B16.50 / BS1560 Flanges ASME/ANSI B16.47 SERIES A Flanges ASME/ANSI B16.47 SERIES B Flanges Gasket Thickness DIN Flange Gaskets JIS Flanges

CUT AND SHEET GASKETS Non-Asbestos Gaskets Flexible Graphite Gaskets Elastomers Flat Ring Gaskets To ASME B16.21 (B16.5 RF Flanges) Flat Ring Gaskets To ASME B16.21 (B16.5 Series A) Full Face Gaskets Dimensions To ASME B16.21

FLANGE INSULATION SETS Insulation Sets Gasket Types Corrosion Control System HP Corrosion Control System LP Gasket & Sleeve Material

METAL JACKETED Gasket Types

KAMMPROFILES Introduction Formats & Characteristics

COMPRESSION PACKINGS Compression Packings Compression Testing

KROLL & ZILLER

WATER JET CUTTING SERVICES

Water jet cutting utilizes ultra-high pressure (UHP) water combined with abrasive to cut through many different materials.



	Water jet Cutting services Water jet cutting uses UHP water at maximum 60,000 psi (4136 bar) combined with abrasives to cut through many different materials for highly complex shapes. Maximum bed size is 145" (3.7m) x 75" (1.9m) providing high versatility for standard sheet sizes and nesting ability. The operating speeds from approximately 400 ipm (1m/min) for soft materials to 10 ipm (50cm/min) for harder materials, such as Stainless Steel up to 6" (150mm) thick. The CNC output high tolerance cutting of 0.0004" (0.1mm) can be based on drawings developed in-house or to customer supplied drawings.